2-Person Indoor Traditional Steam Sauna — Harvia 3.5kW Electric Stove, Wet/Dry, 7-Color LED Lighting, Bluetooth — 220V
Not sure this is the right starting point for you?
Find My Protocol matches you to a protocol tier — and shows whether this product is your week-one entry point or a later-stage addition.
Find My Protocol First →Choose options
Not sure this is the right starting point for you?
Find My Protocol matches you to a protocol tier — and shows whether this product is your week-one entry point or a later-stage addition.
Find My Protocol First →Traditional wet/dry steam sauna for two. Harvia 3.5kW electric stove. Seven-color LED lighting, Bluetooth, and three LED zones integrated.
This is a traditional electric steam sauna — not infrared. Heat comes from the Harvia 3.5kW electric stove. Pour water over the included lava stones with the wooden bucket and scoop to produce steam and raise humidity. Seven-color LED lighting, Bluetooth speakers, FM radio with USB/MP3, and three independent LED strip zones are controlled from one LCD panel.
Critical before ordering: This sauna requires a dedicated 220V / 16A hardwired circuit. An electrician is required for the stove connection. Plan your electrical setup before purchasing.
Specifications
- Capacity: 2 persons
- Sauna Type: Traditional electric — wet/dry steam
- Stove: Harvia 3.5kW electric
- Voltage: 220V / 16A — dedicated circuit required
- Electrician Required: Yes — for stove wiring
- Audio: Bluetooth, FM radio, USB/MP3
- Lighting: RGB color lighting + 3 independent LED zones
- Assembly: Required — minimum 2 people
- Location: Indoor — near floor drain recommended
What Is Included
- Sauna cabin panels
- Harvia 3.5kW electric stove
- Lava stones
- Wooden bucket with plastic liner
- Wooden scoop
- Sand timer
- Thermo-hygrometer
- LED light strips — 3 zones with remote
- Assembly hardware and instructions
Disclaimer
This product is intended for general wellness use only. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Consult a qualified healthcare provider before use if you have a cardiovascular condition, are pregnant, or are managing a chronic illness. Electrical installation must be performed by a qualified electrician.
This is a traditional electric steam sauna. Heat is generated by the Harvia 3.5kW electric stove and radiates through the cabin as hot ambient air — the same format used in Finnish sauna research. It is not infrared. If you are looking for an infrared panel sauna, see our infrared sauna collection.
This sauna requires a dedicated 220V / 16A hardwired circuit. It cannot be plugged into a standard 120V household outlet. A qualified electrician is required to wire the stove connection — the manual includes a three-pin wiring diagram (L/N/GND). Plan your electrical setup before the sauna arrives.
Fill the included wooden bucket with water and use the wooden scoop to pour water directly onto the heated lava stones inside the stove. This produces steam and raises the humidity inside the cabin. For a dry session simply run the stove without adding water.
All features are controlled from the LCD panel. The panel handles temperature, timer, Bluetooth audio, FM radio, USB/MP3 playback, and all three LED zones independently. The RGB chromotherapy ceiling light can also be controlled by remote or via mobile app using the included QR code.
Assembly requires a minimum of two people. The panels use a latch locking system and are labeled in English. Most users complete assembly in a few hours. The glass panels are heavy — two people are required to carry and install them. An electric drill is required.
Indoors only. For steam sauna use, installation near a floor drain is recommended for water management. Install on a completely level surface. Keep away from flammable materials. Do not splash water on any electrical components inside the cabin.
Do not use if pregnant, intoxicated, or running a fever. Individuals with cardiovascular conditions including hypertension, hypotension, or congestive heart failure should consult a physician before use. Conditions associated with impaired sweating — including Parkinson's disease, multiple sclerosis, or diabetic neuropathy — require physician clearance. If you have metal implants, rods, or artificial joints consult your surgeon before use.
No written warranty included