







Choose options








Overview
Acrylic 2-in-1 hot and cold plunge. 37°F to 102°F, Balboa chiller, UV ozonator, 61 gallons.
A rigid acrylic shell on a galvanised steel frame with a Balboa chiller and a heater, so it covers both ends of a contrast protocol. Full polyfoam insulation and a 2.4-inch cover keep the duty cycle down.
Both temperatures, one shell
37°F to 102°F. The chiller and heater are integrated rather than bolted on, and the 50 square foot filtration system runs on a Gecko circulation pump with a UV ozonator for sanitation.
Insulated properly
Full polyfoam shell insulation with a 2.4-inch high-insulation cover. Insulation is the specification that decides running cost — a chiller that is not fighting ambient heat spends most of its life idle.
Specifications
- Model: SCS-ALTA01
- Tub: Premium acrylic shell on a galvanised steel frame
- Dimensions: 77" L × 31.5" W × 30" H
- Water Capacity: 61 gallons
- Weight: 293 lbs dry
- Temperature Range: 37°F – 102°F (3°C – 39°C)
- Chiller: Integrated Balboa
- Heater: Integrated
- Filtration: 50 sq ft with Gecko circulation pump
- Sanitation: Built-in UV ozonator
- Electrical: 110V / 60Hz
- Insulation: Full polyfoam shell; 2.4-inch high-insulation cover
- Control: Digital touchscreen panel
- Lighting: Underwater mood lighting
- Interior Options: Snow White or Black
- Access: Step included
What Is Included
- LIFETREND Alta acrylic plunge with galvanised steel frame
- Integrated Balboa chiller and heater
- 50 sq ft filtration with Gecko pump
- UV ozonator
- 2.4-inch insulated cover
- Digital control panel
- Access step
- Underwater mood lighting
Disclaimer
This product is intended for general wellness use only. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Cold water immersion carries real cardiovascular risk. Consult a qualified healthcare provider before use if you have any heart condition, high or low blood pressure, are pregnant, or are managing a chronic illness. Never plunge alone.

Hot and cold without a second footprint
SPECIFICATION
What you are buying.
-
37°F to 102°F
Integrated Balboa chiller and heater in one shell.
-
50 sq ft with UV ozonator
Gecko circulation pump.
-
61 gallons
77" L × 31.5" W × 30" H, 293 lbs dry.
-
Full polyfoam insulation
2.4-inch high-insulation cover.
-
Digital touchscreen
Underwater mood lighting and an access step included.
-
110V / 60Hz
Acrylic shell on a galvanised steel frame.
HOW A SESSION RUNS
A session, start to finish.
Nothing to plumb, nothing to drain, nothing to schedule around.

Set and hold
Set the temperature and let the chiller bring the water down. Set it once — insulation keeps the chiller idle most of the day. Once it is at temperature it stays there, which is the entire argument for a chiller over ice.
Get in
Exhale on entry and keep breathing slowly — the gasp reflex is the part to manage. Two to three minutes is a normal working session; there is no prize for longer.
Get out and rewarm
Dry off and let your body rewarm on its own rather than jumping straight into a hot shower. Shivering is expected and is part of the response.

Insulation is the running cost











