Skip to content

Cart

Your cart is empty

1 Person Indoor FAR Infrared Sauna, Canadian Hemlock, 7 Heaters, ETL & cETL Listed, 120V, 1700W

Sale price$1,479.00

No electrician. No panel upgrade.

  • Seven FAR infrared heaters
  • Standard 120V outlet
  • ETL and cETL Listed
  • Solid Canadian hemlock
View More Details
1 Person Indoor FAR Infrared Sauna, Canadian Hemlock, 7 Heaters, ETL & cETL Listed, 120V, 1700W
1 Person Indoor FAR Infrared Sauna, Canadian Hemlock, 7 Heaters, ETL & cETL Listed, 120V, 1700W Sale price$1,479.00
Overview

One-person FAR infrared sauna. 7 heaters. ETL and cETL Listed. Standard 120V outlet. No electrician required.

Solid Canadian hemlock construction with 7 FAR infrared heaters reaching up to 140°F. ETL Listed and cETL Listed for electrical safety compliance, two independently verified certifications. Integrated bench seating, tempered glass door, LED lighting, interior control panel with adjustable temperature and timer, air vent, and audio connectivity jacks. Standard 120V / 15A household outlet. No dedicated circuit or electrician required.

FAR Infrared Heat

FAR infrared heaters warm the body directly rather than heating the surrounding air first, producing a deep heat response at lower ambient temperatures than a traditional sauna. The recommended session range is 120–140°F for 15–25 minutes.

ETL and cETL Safety Certification

This sauna carries both ETL Listed and cETL Listed certifications, independently tested and verified by Electrical Testing Laboratories for electrical safety compliance in the United States and Canada respectively. These are two of the most recognized third-party safety certifications for electrical appliances in North America.

Specifications
  • Capacity: 1–2 persons
  • Shape: Rectangle
  • Interior Dimensions: 68" H × 42" W × 36" D
  • Overall Dimensions: 75" H × 46" W × 40" D
  • Weight: 330 lbs
  • Wood: Solid Canadian hemlock
  • Heat Source: FAR infrared
  • Number of Heaters: 7
  • Temperature Range: 68°F – 140°F
  • Wattage: 1,700W
  • Voltage: 120V / 15A standard outlet
  • Electrician Required: No
  • Door: Tempered glass
  • Floor: Included
  • Safety: ETL Listed and cETL Listed
  • Assembly: Required, 2 people recommended
  • Tools Required: Screwdriver and ladder (not included)
What Is Included
  • Canadian hemlock sauna cabin
  • 7 FAR infrared heaters
  • Integrated bench
  • Tempered glass door
  • LED lighting
  • Interior control panel with timer
  • Air vent
  • Audio input/output jacks
  • Floor panel
  • Assembly hardware and instructions
Disclaimer

This product is intended for general wellness use only. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Consult a qualified healthcare provider before use if you have a cardiovascular condition, are pregnant, or are managing a chronic illness. Always hydrate adequately before and after sessions.

Sauna power cord plugged into a standard household wall outlet

120V · 15A · standard household outlet

No electrician. No panel upgrade.

Most saunas this size need a dedicated 240V circuit and a licensed electrician before you can switch them on. This one draws 1,700W from the wall socket you already have. Unbox it, build it, plug it in.

SPECIFICATION

What you are buying.

  • Seven FAR infrared heaters

    Carbon panels at back, sides and calf level, 1,700W total, reaching 140°F. Infrared warms the body directly rather than heating the air first.

  • Standard 120V outlet

    15A household circuit. No dedicated line, no panel upgrade and no electrician before first use.

  • ETL and cETL Listed

    Independently tested by Electrical Testing Laboratories against US and Canadian electrical safety standards. Two separate certifications.

  • Solid Canadian hemlock

    Low-resin and close-grained, so it stays comfortable against skin at temperature and does not off-gas the way softwoods can.

  • Interior control panel

    Temperature and session timer set from inside the cabin, with LED lighting and audio input. Sessions run 15–25 minutes at 120–140°F.

  • Spans the studied infrared band

    Adjustable from 68°F to 140°F, covering the 95–122°F (35–50°C) cabin range used in infrared sauna research (Mero et al., SpringerPlus, 2015, PMID 26180741). Sessions of 15–25 minutes sit inside the 5–20 minute exposure studied by Laukkanen et al., JAMA Internal Medicine, 2015, PMID 25705824.

HOW A SESSION RUNS

A session, start to finish.

One-person Canadian hemlock FAR infrared sauna cabin installed in a finished home room
  1. Preheat

    15 minutes. Set the temperature on the interior panel and let the cabin come up. Seven carbon heaters, no water, no steam, nothing to plumb.

  2. Heat

    15–25 minutes at 120–140°F. FAR infrared warms the body directly rather than heating the air first, so the deep heat response arrives at a lower ambient temperature.

  3. Cool down

    10 minutes. Open the door, sit, rehydrate. Cool-down is part of the protocol, not an afterthought, and it is where most of the adaptation is consolidated.

BUILD

Made to be used every day.

  • Carbon FAR infrared heater panel behind hemlock slats

    Seven FAR infrared heaters

    Carbon panels set behind the slats at back, sides and calf level, so the heat reaches you evenly rather than from one wall.

  • Interior control panel

    Temperature and timer from inside the cabin, plus LED lighting and audio input. You do not get up to change anything.

  • Solid Canadian hemlock

    Hemlock is low-resin and close-grained, so it stays comfortable against skin at temperature and does not off-gas the way softwoods can.

One-person infrared sauna in the corner of an ordinary spare room

It fits the corner you already have.

A footprint under four feet by three and a half. A spare bedroom, a home office, a finished basement, a landing. Interior is 68″ H × 42″ W × 36″ D, room to sit upright with the door closed.

Assembly takes two people and a screwdriver. No plumbing, no drain, no dedicated circuit.

HEAT · COLD · LIGHT

Complete the protocol.

Heat, cold and light work as a sequence, not three separate purchases. Find My Protocol builds that sequence for you. It tells you what to add next and how long to run each one. It is free whether you buy today or not.

Find my protocol
On saleDeepTime Fiber Core All-In, Cold Plunge with Built-In Chiller
DeepTime Fiber Core All-In, Cold Plunge with Built-In Chiller Sale priceFrom $4,899.00 Regular price$8,990.00
Save $2,000.00RevX X Tub, Acrylic Cold Plunge with LUX Chiller
RevX X Tub, Acrylic Cold Plunge with LUX Chiller Sale price$7,500.00 Regular price$9,500.00

FAQ

What electrical setup do I need?

No. This sauna runs on a standard 120V / 15A household outlet, the same as most home appliances. No dedicated circuit and no electrician are required. Plug into any grounded 15-amp outlet.

What are ETL and cETL certifications?

ETL Listed means the product has been independently tested by Electrical Testing Laboratories and verified to meet US electrical safety standards. cETL Listed means it also meets Canadian electrical safety standards. Both certifications require third-party testing. They are not self-declared by the manufacturer.

How do I maintain and clean the sauna?

After each session wipe the bench and interior surfaces with a clean dry cloth. Do not use chemical cleaning agents inside the cabin. Keep the interior dry between sessions. For exterior wood surfaces, wipe with a lightly damp cloth if needed and dry immediately. Do not leave towels or wet items inside the cabin after use.

How long does assembly take?

Assembly requires two people and a screwdriver and ladder, neither of which is included. All panels are pre-fabricated. Assembly time varies but most users complete it in a few hours. Do not attempt assembly alone; panels are heavy and require two people to position correctly.

What is the warranty?

Product warranty: Yes

Commercial warranty: No

Who should not use this sauna?

Do not use if pregnant, intoxicated, or running a fever. Individuals with cardiovascular conditions including hypertension, hypotension, or congestive heart failure should consult a physician before use. If you have metal implants, rods, or artificial joints consult your surgeon before use. Stop use immediately if you experience discomfort or pain during any session.